گیرنده تک کانال 220 ولت لامپ و لوستر 433MHz

گیرنده تک کانال 220 ولت لامپ و لوستر 433MHz

گیرنده تک کانال مدل KR2201D-4  با ولتاژ کاری AC 90V~250V ، دارای فرکانس کاری 433 مگاهرتز است که از نوع لرن کد می باشد. مدهای کاری این گیرنده شامل Momentary, Toggle و Latching  می باشند. این گیرنده ریموت هایی با چیپ PT1527, EV1527, SCT527 ,HS1527 SCL1527, FP1527, EV1527  را ساپورت می کند و برد آن در فضای باز بیش از 50  متر است.

About Working Mode:

Momentary: Push the remote button , the relay connects, release the remote button , the relay dis-connects. Toggle: Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects . Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.

Receiver Code Resetting/Clearing:

Push the learning button on the receivers 8 times, the codes will be cleared. After clearing the code, all the remote controls need to be re-paired in order to control the receiver again.

Learning The Code (Momentary):

Press the learning key once, the LED on the Receiver will flash once. When the LED switches on, press any button on the remote control, the LED on the Receiver will flash 3 times and switches off. Indicates that they are successfully paired.

Learning The Code (Toggle):

Press the learning key twice, the LED on the receiver will flash twice. When the LED switch on, press any button on the remote control, the LED on the Receiver will flash 3 times and switches off. Indicates that they are successfully paired.

Learning The Code (Latching):

Notes: Latching mode require 2 different buttons, the first one for “ON”, the second one for “OFF”. For example: button A = ON, button B = OFF. Push the learning key on the receiver 3 times, initiate latching mode setting. Wait for a moment, the LED indicator on the receiver will flash briefly and switches off. Push the remote button A, LED flashes 5 times. Push the remote button B. LED flashes 5 times. 3 seconds later, the LED indicator will switch on again, indicates that the remote control and the receiver are successfully paired. A = ON, B = OFF.