ماژول کنترلر دما با نمایشگر W1401 12V/10A
ماژول کنترلر دما با نمایشگر W1401 12V/10A، ماژول کنترلر دما XH-W1401 با قابلیت تنظیم حداقل و حداکثر دما، نمایشگر سون سگمنتی، سنسور ضد آب، رله خروجی با قابلیت تحمل جریان 10 آمپر
- محدوده ولتاژ کاری: 9-15V
- ولتاژ ورودی: 12 ولت (9تا15ولت)
- جریان خروجی: رله 10 آمپر
- محدوده دمای کاری: 0-99
- ابعاد: 78x50mm
- وزن:-gr + موارد بیشتر
این کالا در حال حاضر در انبار فروشگاه موجود ، آماده پردازش و ارسال است
207,500 تومان
موجود
ماژول کنترلر دما با نمایشگر W1401 12V/10A
ماژول XH-W1401 یک ماژول کنترل دمای دیحیتال با قابلیت تنظیم بیشینه و کمینه دما می باشد. توسط کلیدهای قرار گرفته بر روی بورد دستگاه می توانید حداقل و حداکثر دما را تنظیم کنید. خروجی ماژول بصورت رله بوده که می تواند حداکثر جریان 10آمپر را تحمل کند.
از جمله ویژگی های ماژول می توان به استفاده از سون سگمنت و رله خروجی با حداکثر جریان 10 آمپر، سنسور ضد آب و همچنین کلیدهای مستقل جهت تنظیم حداقل و حداکثر دما اشاره کرد. توضیحات بخش های مختلف این ماژول در تصویر زیر مشخص شده است:
- Temperature range: -9-99 degrees
- Accuracy: 1 degree
- Control accuracy: 1 degree
- Setting Range: -9-99 degrees
- Refresh rate: 0.5S
- Input Power: DC9V-15V
- Output: relay output, capacity 220V 10A / 12V 10A
- Humidity: 20% -85%
- Temperature sensor: NTC(3950-10k 1%)
- Size: 7.8cm x 5.1cm x 3cm
- Lights, digital tube, key state description
- Red start Indicator: START (red) indicator light, which means that the relay is closed, the device begins to work.
- Green stop light: Stop (green) light is on, which means that the relay is disconnected, the device stops working.
- Digital Tube: Middle red LED display for the current detection temperature, the left green digital display tube as set start temperature, the right side of the green digital display for the set stop temperature.
- Button: START UP and Down to set start temperature; Stop the button to set stop temperature.
1. High temperature start – Cooling Mode: Set the starting temperature> stop temperature, when the detected temperature ≥ start temperature, the relay is closed, refrigeration equipment work; when the detected temperature ≤ stop temperature, the relay is off, refrigeration equipment stops working . For example: Set the start temperature is 30 ℃, stop temperature is 25 ℃, when the detected temperature ≥30 ℃, the relay is closed, start indicator (red) light; when the detected temperature ≤25 ℃, the relay off, stop instruction light (green) light.
2. Low temperature start – Heating mode: Set the start temperature
برای مشاهده ویدئو نحوه عملکرد ماژول می توانید به کانال آپارات الکترونیک 724 مراجعه کنید.
شما هم درباره این کالا پرسش ثبت کنید
دیتاشیت
ماژول کنترلر دما با نمایشگر W1401 12V/10A
امتیاز کاربران به: ماژول کنترلر دما با نمایشگر W1401 12V/10A | (0 نفر )
هنوز امتیازی ثبت نشده است
شما هم میتوانید در مورد این کالا نظر دهید.