ماژول گیرنده IR چهار کاناله لرن کد

ماژول گیرنده IR چهار کاناله لرن کد

این محصول یک گیرنده 4 کانال دارای قابلیت لرن یا یادگیری می باشد. شما می توانید با استفاده از یک ریموت مادون قرمز چهار خروجی این ماژول را کنترل کنید. هر کانال خروجی توسط کلید متناظر روی برد لرن می شود. نحوه لرن هر کانال توضیح داده شده است. هم چنین خروجی ها دارای سه حالت Self-Lock، InterLock و Inching عمل می کنند و شما می توانید هر کدام از این حالت ها را فعال کرده و استفاده کنید.

شماتیک برد:

گیرنده اصلی این برد می تواند یک سنسور مادون قرمز VS/HX1838 باشد که در قسمت Pinout سه تایی روی برد متصل می شود. ولتاژ تغذیه این ماژول 3 تا 5 ولت DC بوده و ابعاد آن 30x30mm است.

Using Method:

  There are 4 keys in total.K1,K2,K3,K4 infrared remote control receive board 4-channels can be learnt independently.(Default output is low level)
1.The First Channel Learning:after power on,press the K1 key and then loosen,learning indicator lamp will flash for once;it represents learning the first channel trigger successfully.Then press the remote control,and the learning indicator lamp will flash fastly for three times.And it represents the first channel learning has done
2.The Second Channel Learning:after power on,press the K2 key and then loosen,learning indicator lamp will flash for once;it represents learning the second channel trigger successfully.Then press the remote control,and the learning indicator lamp will flash fastly for three times.And it represents the second channel learning has done
3.The Third Channel Learning:after power on,press the K3 key and then loosen,learning indicator lamp will flash for once;it represents learning the third channel trigger successfully.Then press the remote control,and the learning indicator lamp will flash fastly for three times.And it represents the third channel learning has done
4.The Fourth Channel Learning:after power on,press the K4 key and then loosen,learning indicator lamp will flash for once;it represents learning the fourth channel trigger successfully.Then press the remote control,and the learning indicator lamp will flash fastly for three times.And it represents the fourth channel learning has done

One Key Full On/Off Learning Method:

  For example,key A (random key) for controlling full off,and key B (random key) for controlling full on (A and B cannot be the same key)
1.Full On Key Learning:after power on,press the K2 and K3 at the same time;then loosen the two keys,the learning indicator lamp will flash for twice.Let the remote control aim at the receiving head and press A key,then learning has finished and the learning indicator lamp will flash quickly for three times;A key can control 4 channels full on in any state
2.Full Off Key Learning:after power on,press the K3 and K4 at the same time;then loosen the two keys,the learning indicator lamp will flash for twice.Let the remote control aim at the receiving head and press the B key,then learning has finished and the learning indicator lamp will flash quickly for three times;B key can control 4 channels full off in any state

Self-Lock,Interlock,Inching Mutual Switch Operating Steps:

1.Interlock:when power off,press the learning key K2 then power on,the learning indicator lamp will flash quickly for three times;set as interlock output (press the remote control key,corresponding channel will output while other channels are all closed and no output)
2.Self-Lock:when power off,press the learning key K3 then power on,the learning indicator lamp will flash quickly for three times;set as self-lock output (press the remote control key,corresponding channel negation will not affect the state of other channels;if loosen the key,output state will remain)
3.Inching:when power off,press the learning key K4 then power on,the learning indicator lamp will flash quickly for three times;set as inching output (press the remote control key,corresponding channel will output;if loosen the remote control key,output will be stopped)